Omnitron Systems Technology TV Converter Box 1000FF User Manual

iConverter OC3FF Dual Fiber Modules  
Fiber Type Distances Tx  
Wavelength Wavelength  
iConverter 100FF Dual Fiber Modules  
iConverter 1000FF Dual Fiber Modules  
iConverter OC12FF Dual Fiber Modules  
Fiber Type Distances Tx  
iConverter xFF Dual Fiber Modules  
Rx  
Fiber Type Distances  
Tx  
Rx  
Connector  
Connector  
Rx  
Wavelength Wavelength  
Fiber Type  
(Port 1  
Port 2)  
Distances  
(Port 1  
Port 2)  
Tx  
Fiber Type  
(Port 1  
Port 2)  
Distances  
(Port 1  
Port 2)  
Tx  
Connector  
SC/SC  
Connector  
SC/SC  
Rx Wavelength  
(nm)  
(Port 1  
Port 2)  
(Port 1  
Port 2)  
Connector  
SFP  
Rx Wavelength  
(nm)  
(Port 1  
Port 2)  
(Port 1  
Port 2)  
Wavelength Wavelength  
(nm)  
Wavelength  
(nm)  
(Port 1  
Port 2)  
(Port 1  
Port 2)  
Wavelength  
(nm)  
ST/ST  
SC/SC  
8622-1  
ST/ST  
SC/SC  
(nm)  
1310  
1310  
1310  
1310  
1310  
1550  
(nm)  
1310  
1310  
1310  
1310  
1310  
1550  
(nm)  
(nm)  
1310  
1310  
1310  
1310  
1310  
1550  
(nm)  
1310  
1310  
1310  
1310  
1310  
1550  
iConverter®  
100FF, OC3FF, OC12FF, 1000FF and xFF  
Fiber-to-Fiber Converter User Manual  
MM  
SM  
MM  
SM  
MM  
SM  
5km  
30km  
5km  
MM  
SM  
MM  
SM  
MM  
SM  
5km  
30km  
5km  
1310  
1310  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1310  
1310  
1550  
220/550m1  
220/550m1  
220/550m1  
12km  
850  
850  
850  
850  
8660-1  
8660-2  
8661-1  
-
-
-
-
-
-
MM  
SM  
MM  
SM  
MM  
SM  
220/550m1  
12km  
8620-1  
8620-2  
MM  
MM  
MM  
SM  
MM  
SM  
MM  
SM  
SM  
SM  
SM  
SM  
-
8642-0  
8642-1  
8642-2  
8642-3  
8643-2  
8699-0  
8681-1  
8681-2  
-
8622-2  
850  
850  
8661-2  
Refer to the SFP data sheet for supported transceivers.  
60km  
5km  
60km  
5km  
220/550m1  
34km  
1310  
850  
1310  
850  
-
8622-3  
SC/SC  
8634-1  
220/550m1  
8661-3  
SC/SC  
8674-1  
120km  
120km  
220/550m1  
80km  
34km  
1310  
850  
1310  
850  
ST/SC  
8630-1  
iConverter 100FF Single-Fiber Modules  
8681-3  
SC/SC  
8690-1  
Port 1 (P1)  
ST/SC  
8670-1  
iConverter OC3FF Single-Fiber Modules  
220/550m1  
80km  
MM  
SM SF  
MM  
5 km  
20 km  
5 km  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
MM  
SM SF  
MM  
5 km  
20 km  
5 km  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1550  
1310  
1310  
1310  
1550  
iConverter OC12FF Single-Fiber Modules  
12km  
MM  
SM SF  
MM  
220/550m1  
20 km  
1310  
1310  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
8631-1  
8630-2  
8631-2  
8632-1  
8633-1  
8632-2  
8633-2  
8635-1  
8634-2  
8635-2  
8636-1  
8637-1  
8636-2  
8637-2  
Port 2 (P2)  
34km  
SM SF  
MM  
20 km  
5 km  
8671-1  
8670-2  
8671-2  
8672-1  
8673-1  
8672-2  
8673-2  
8675-1  
8674-2  
8675-2  
8676-1  
8677-1  
8676-2  
8677-2  
SM SF  
MM  
20 km  
5 km  
12km  
8643-3  
ST/SC  
220/550m1  
20 km  
SM SF  
MM  
40 km  
5 km  
80km  
8691-1  
8692-1  
8693-1  
SM SF  
MM  
40 km  
5 km  
iConverter 1000FF Single-Fiber Modules  
SM SF  
SM  
SM SF  
SM  
40 km  
30 km  
20 km  
30 km  
20 km  
30 km  
40 km  
30 km  
40 km  
MM  
SM SF  
MM  
220/550m1  
20 km  
850  
1310  
850  
850  
1550  
850  
12 km  
SM SF  
SM  
40 km  
30 km  
20 km  
30 km  
20 km  
30 km  
40 km  
30 km  
40 km  
8650-1  
8651-1  
8652-1  
8653-1  
8650-2  
8651-2  
8652-2  
8653-2  
SM SF  
SM  
20 km  
SM SF  
SM  
OVERVIEW:  
220/550m1  
20 km  
SM SF  
SM  
12 km  
The iConverter FF modules are fiber-to-fiber media  
converters providing single-mode (SM) to multimode (MM),  
dual fiber to single-fiber, wavelength conversion and  
fiber extension. Fixed-fiber models are available for  
Ethernet, Fast Ethernet, Gigabit Ethernet and  
SONET/SDH applications. Small Form Pluggable (SFP)  
model is protocol transparent and also supports Fibre  
Channel.  
The iConverter FF media converters can be used in an  
unmanaged or managed fashion. When unmanaged, they  
can be installed in a chassis without a Network  
Management Module (NMM). To be managed, an NMM or  
a media converter with built-in management must be  
installed in the same chassis.  
SM  
SM SF  
SM  
1550  
1310  
1310  
1310  
1550  
850  
1310  
1310  
1550  
1310  
1310  
850  
SM SF  
20 km  
SM SF  
SM  
SM SF  
SM  
12 km  
162.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm  
multimode fiber up to 550m. Refer to the fiber cable manufacturer for  
multimode distance specifications.  
SM SF  
SM  
20 km  
SM  
SM SF  
SM  
12 km  
SM SF  
SM SF  
MM  
20 km  
SM SF  
220/550m1  
40 km  
SM SF  
MM  
1310  
850  
1550  
850  
220/550m1  
40 km  
SM SF  
SM  
1550  
1310  
1310  
1310  
1550  
1310  
1310  
1550  
1310  
1310  
12 km  
SM SF  
SM  
40 km  
12 km  
SM SF  
40 km  
162.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm  
multimode fiber up to 550m. Refer to the fiber cable manufacturer for  
multimode distance specifications.  
Page 1  
Page 2  
Page 3  
Page 4  
Page 5  
Page 6  
Limitation of Warranty  
FRONT PANEL DIP-SWITCH SETTINGS:  
MOUNTING AND CABLE ATTACHMENT:  
iConverter modules are hot-swappable and can be installed  
into any chassis in the iConverter family.  
Warning  
FIBER-TO-FIBER SPECIFICATIONS:  
LINK MODES:  
The foregoing warranty shall not apply to defects resulting  
from improper or inadequate use and/or maintenance of  
the equipment by Buyer, Buyer-supplied equipment, Buyer-  
supplied interfacing, unauthorized modifications or  
tampering with equipment (including repairs of equipment  
by personnel not specifically authorized and certified by  
Omnitron, or misuse, or operating outside the environmental  
specification of the product (including but not limited to voltage,  
ambient temperature, radiation, unusual dust, etc.), or  
improper site preparation or maintenance.  
The operating description in this Instruction Manual is for  
use by qualified personnel only. To avoid electrical shock,  
do not perform any servicing of this unit other than that  
contained in the operating instructions, unless you are  
qualified and certified to do so by Omnitron Systems  
Technology, Inc.  
In order to accommodate different user needs, the  
iConverter FF media converters support two different  
linking modes.  
Model Type  
100FF  
1000FF  
OC3FF  
OC12FF  
xFF  
1. Carefully slide the iConverter module into installation slot,  
aligning the module with the installation guides. NOTE:  
Ensure that the module is firmly seated against backplane.  
2. Secure the module by securing panel fastener screw  
(attached to module) to chassis front.  
3. When using an SFP model (8699-0), insert the SFP  
Fiber transceiver into the SFP receptacle on the module.  
Note: The release latch of the SFP Fiber transceiver  
must be in the closed position before insertion.  
1000BASE-SX,  
1000BASE-LX,  
1000BASE-ZX,  
1000BASE-BX  
100BASE-FX,  
1000BASE-X,  
OC-3, OC-12  
Fibre Channel  
100BASE-FX,  
100BASE-BX,  
100BASE-LX  
Protocols  
OC-3  
OC-12  
Fig. 2 Front Panel Dip-Switches  
Link Segment/Link Propagation “LS/LP” Dip-Switch:  
This DIP-Switch has no affect. The LS function of this  
DIP-Switch has been disabled to enhance compatibility  
with third-party fiber optic devices. iConverter  
Fiber-to-Fiber media converters normally operate in LP  
mode.  
Maximum  
Data Rate  
155Mbps  
1.25Gbps  
155Mbps  
SC, ST,  
Single-Fiber Single-Fiber  
SC SC  
1.25Gbps  
SC,  
1.25Gbps  
SFP  
Warranty  
SC, ST,  
Single-Fiber  
SC  
SC,  
Single-Fiber  
SC  
This product is warranted to the original purchaser against  
defects in material and workmanship for a period of 2  
YEARS from the date of shipment. A LIFETIME limited  
warranty may be obtained by the original purchaser by  
REGISTERING this product with Omnitron within 90 days  
from the date of shipment. To register, complete and mail  
or fax the enclosed Registration Card to the indicated  
address. You may also register your product on the internet  
warranty period, Omnitron will, at its option, repair or replace  
a product which is proven to be defective.  
Fiber  
Connectors  
Controls  
Link Propagate, Remote Fault Detection  
No other warranty is expressed or implied. Omnitron  
specifically disclaims the implied warranties of  
merchantability and fitness for any particular purpose.  
LED  
Power,  
Remote Fault Detection Switch “RFD” Dip-Switch:  
When in the Remote Fault Detection “RFD” position,  
the Remote Fault Detection mode is enabled and LP  
mode is disabled. When in the Normal “Norm” position  
(factory setting), Remote Fault Detection is disabled  
and LP mode is enabled.  
Displays  
Fiber Optic Link (2)  
4. Attach an appropriate multimode or single-mode fiber  
cable to each fiber connector. The transmit cable (Tx)  
must attach to the receive side on the other device; the  
receive cable (Rx) must attach to the transmit.  
5. When using single-fiber (SF) models, the Tx  
wavelength on one end must match the Rx wavelength  
on the other and the converters must be used in  
matched pairs (example: model 8670-1 must be  
matched with model 8671-1).  
Dimensions  
Weight  
W:0.85" x D:4.5" x H:2.8"  
8 oz.  
Exclusive Remedies  
The remedies provided herein are the Buyer’s sole and  
exclusive remedies. Omnitron shall not be liable for any  
direct, indirect, special, incidental, or consequential  
damages, whether based on contract, tort, or any legal  
theory.  
UL, CE, FCC Class A,  
NEBS Level 3  
Compliance  
Power  
Requirement  
(typical)  
LED INDICATORS:  
0.5A @  
3.3VDC  
0.5A @  
3.3VDC  
0.5A @  
3.3VDC  
0.5A @  
3.3VDC  
0.5A @  
3.3VDC  
For warranty service, the product must be sent to an  
Omnitron designated facility, at Buyer’s expense. Omnitron  
will pay the shipping charge to return the product to Buyer’s  
designated US address (within the 48 contiguous states  
and the District of Columbia) using Omnitron’s standard  
shipping method.  
LED  
Color Description  
Fig. 1 Link Modes  
Standard:  
Wide:  
Storage:  
0 to 50º  
-40 to 60º  
-40 to 80º  
C
C
C
Pwr:  
Yellow On--Power on  
Temperature  
In Link Propagate (LP) mode (sometimes referred to as  
Link Loss Carry Forward), a port transmits a Link signal  
only when receiving a Link on the other front-plane port,  
and a loss of a received Link at one port causes the  
other front-plane port to stop transmitting its link signal.  
For example, P1 transmits a Link only when receiving a  
Link at P2 [Fig 1(a)].  
Lk/Rx (P1): Green On--Link  
Lk/Rx (P2): Green On--Link  
5 to 95%  
(non-condensing)  
Humidity  
Altitude  
-100m to 4000m  
MTBF (hrs)  
1,300,000  
Technical Support:  
In Remote Fault Detection (RFD) mode, a port transmits  
a Link signal only when both itself and the other port are  
receiving Link signals. A loss of a received Link signal  
at a port is Looped-back and the port stops transmitting  
a Link signal. The same loss of Link is propagated to  
the other port which also stops transmitting the Link  
signal. For example, the loss of Link into P2 causes  
both P1 and P2 ports to stop transmission of the Link  
signal [Fig 1(b)].  
For help with this product, contact our Technical Support:  
Phone:  
Fax:  
(949) 250-6510  
(949) 250-6514  
Address: Omnitron Systems Technology, Inc.  
140 Technology Dr., #500  
Irvine, CA 92618 USA  
E-mail:  
URL:  
Note: Connecting two adjacent converters which  
are both set to RFD is not permitted and will cause  
a “deadly embrace” lockup.  
Form: 040-08600-001L 3/08  
Page 12  
Page 7  
Page 8  
Page 9  
Page 10  
Page 11  
 

Murray Lawn Mower 96017000500 User Manual
Nexus 21 Stereo Receiver Multi Control User Manual
Nilfisk ALTO Sander Classic 12 User Manual
Nintendo Video Games Star Fox 64 3D User Manual
NordicTrack Treadmill NTL109053 User Manual
Nortel Networks Network Router AS 5300 User Manual
Numark Industries Musical Instrument DM1295 User Manual
Oki Printer 6150 User Manual
Panasonic DVD Recorder DMR XW300 User Manual
Panasonic Electric Shaver ES2216PC User Manual